Menu
Cart 0

Smooth-On

Free Form Air Epoxy Putty

  • from 4995 Incl. GST


Manufacturer information

 


Free Form® AIR is an extremely lightweight epoxy putty suitable for an infinite variety of industrial and art-related applications.  It is a low-odor, low shrinkage putty that is unique, inexpensive and easy to use.   Free Form® AIR is mixed by hand with a 1A:1B by volume mix ratio.  It offers a long working time and cures overnight at room temperature to a hard, rigid epoxy that is very strong with modeling board-like properties.  Cured Free Form® AIR is so lightweight, it will float in water.  It can be sanded, shaped, drilled, tapped and CNC machined/routered.  It will readily accept any paint.  Free Form Air can also be color pigmented with SO-Strong® or Ignite® colorants.

After mixing, Free Form® AIR can be pressed into a mold to make a lightweight, detailed casting. It will hold vertical surfaces and can be applied to almost any surface including polystyrene foam for rough sculpting.   Free Form® putty can also be used to make rigid support shells or mother molds.

In Epoxy Tooling Applications it can be used as a filleting material.  Also good for jig and fixture construction.

Used as a lightweight adhesive, Free Form® AIR will bond to itself and a variety of surfaces including wood, stone and EpoxAcoat® Red surface coat epoxy.  Free Form® Air will even cure under water.

Pot Life/Working Time; this material is mass sensitive.  The more material you mix at one time, the less time you have to work with it. Working tip;  If mixing a large quantity, flatten putty with a rolling pin to reduce mass concentration and extend pot life.

  • Thickness: 1.5" (3.81 cm) – pot life is 30 minutes, handling time is 2.5 hours, full cure in 24 hours.
  • Thickness: 3/8” (0.95 cm) – pot life is 60 minutes, handling time is 4 hours, full cure in 24 hours.
  • Thickness: 1/8” (0.32 cm) - pot life is 120 minutes; handling time is 8 hours, full cure in 24 hours.

Safety Data Sheets



We Also Recommend