Mold Star Pourable Silicone
Mold Star® rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star® silicones feature relatively low viscosities and vacuum degassing is not required for most applications.
Mold Star® 15 SLOW is 50 minutes and cure time is 4 hours at room temperature.
Mold Star® 16 FAST is a faster material with a 6 minute pot life and 30 minute cure time.
Mold Star® 30 is a harder material, with a 30A Shore hardness.
Mold Star® silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star® will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star® rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX® is NOT recommended with Mold Star® 15, 16 or 30 silicone rubbers.
NOTE: This product will not work with modeling clays containing sulfur under any circumstances.
Mold Star - Safety Data Sheet (SDS)